Security
Removing DriveLock Protection
To access the DriveLock settings in the Setup utility:
1.If the notebook is on, shut down the notebook.
If the notebook is not on and you are not sure whether the notebook is off or in hibernation, press the power button and then shut down the notebook through the operating system.
2.Turn on the notebook.
3.Press f10 while the Setup message is displayed in the
4.Use the arrow keys to select Security > DriveLock Password, and then press enter.
5.Type the current password in the Enter Current Password field, and then press enter 3 times. (Pressing enter at each of the remaining password fields indicates that you are removing, not changing, the password.)
6.When the Setup Notice is displayed, press enter to save your changes.
7.To save your preferences and exit the Setup utility, press f10, and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
Hardware and Software Guide |