Multimedia
Connecting a Monitor, Projector or Television
Connecting a Monitor or Projector
To connect an optional VGA monitor or projector to the notebook:
1.Be sure the monitor or projector is turned off.
2.Connect the VGA cable on the monitor or projector to the external monitor port, which is on the rear of the notebook.
3.Plug the power cord of the monitor or projector into a grounded AC outlet.
4.Turn on the monitor or projector.
❏If the notebook does not recognize the monitor or projector, restart the notebook.
❏If a properly connected monitor, projector or other display device does not display an image, try pressing the fn+f4 hotkey until the image is switched to the new device.
Hardware and Software Guide |