Modem and Networking
7.In the Phone and Modem Options dialog box, select the Modems tab.
8.Select your modem, and then select Properties.
9.Clear the check box for Wait for dial tone before dialing.
10.Select OK > OK.
Preinstalled Communication Software
To access preinstalled modem software for terminal emulation and data transfer:
1.Select Start > All Programs > Accessories >
Communications.
2.Select a fax or terminal emulation program or a connection wizard.
For information about establishing an Internet connection for your modem, refer to the “Connect to the Internet” section in the printed Getting Started guide included with your notebook.
For more modem information, including instructions for using AT commands and dial modifiers, refer to the supplementary guides included with your notebook. These guides, which are provided only in English, include Modem Command Guidelines (Advanced Users Only) and a guide to the AT commands supported by your modem.
Hardware and Software Guide |