Removal and Replacement Procedures
✎Before disconnecting the cables, make note of which wireless antenna cable is attached to which antenna clip on the Mini PCI communications module.
7.Disconnect the two wireless antenna cables 1 from the Mini PCI communications module.
8.Spread the two retaining tabs 2 that secure the Mini PCI communications module to the communications compartment socket. (The front edge of the module rises up).
9.Remove the wireless communications module 3 by pulling the module away from the socket at a
✎Mini PCI communications modules are designed with a notch 4 to prevent incorrect installation into the Mini PCI socket.
Removing a Mini PCI Communications Module
Reverse the above procedure to install a Mini PCI communications module.
Maintenance and Service Guide |