Speaker assembly
Description | Spare part number |
|
|
Speaker assembly (includes cable) | |
|
|
Before removing the speaker assembly:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.
4.Remove the battery (see Battery on page 46).
5.Remove the following components:
a.Optical drive (see Optical drive on page 50)
b.Keyboard (see Keyboard on page 57)
c.Top cover (see Top cover on page 59)
Remove the speaker assembly:
1.Turn the top cover upside down.
2.Remove the three Phillips PM2.5×3.0 screws (1) that secure the speaker assembly to the top cover.
3.Lift up and remove the speakers (2).
Reverse this procedure to install the speaker assembly.
62 Chapter 4 Removal and replacement procedures | ENWW |