Security menu
NOTE: Some of the menu items listed in this section might not be supported by the computer.
Select | To do this |
|
|
Setup Password | Enter, change, or delete a setup password. |
|
|
Enter, change, or delete a | |
|
|
Password Options | ● Enable/disable stringent security. |
| ● Enable/disable the password requirement on computer |
| restart. |
|
|
DriveLock Passwords | ● Enable/disable DriveLock on any computer hard drive. |
| ● Enter, change, or disable DriveLock on an optional |
| MultiBay hard drive. |
| NOTE: DriveLock settings are accessible only when you |
| enter Computer Setup by turning on (not restarting) the |
| computer. |
|
|
System IDs | Enter a |
| ownership tag. |
|
|
Disk Sanitizer | Run Disk Sanitizer to destroy all existing data on the primary |
| hard drive. The following options are available: |
| ● Fast: Runs the Disk Sanitizer erase cycle once. |
| ● Optimum: Runs the Disk Sanitizer erase cycle 3 times. |
| ● Custom: Allows you to select the desired number of |
| Disk Sanitizer erase cycles from a list. |
| CAUTION: If you run Disk Sanitizer, the data on the |
| primary hard drive is destroyed permanently. |
|
|
Diagnostics menu
Select | To do this |
|
|
HDD | Run a comprehensive |
| system or on any optional MultiBay hard drive. |
|
|
Memory Check | Run a comprehensive check on system memory. |
|
|
ENWW | Computer Setup in Linux 97 |