Modem module
Description | Spare part number |
|
|
All countries and regions except for Australia and New Zealand (for model 1.0 only) | |
|
|
Australia and New Zealand (for model 1.0 only) | |
|
|
Before removing the modem module:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.
4.Remove the battery (see Battery on page 46).
5.Remove the following components:
a.Hard drive (see Hard drive on page 47)
b.Optical drive (see Optical drive on page 50)
c.Keyboard (see Keyboard on page 57)
d.Top cover (see Top cover on page 59)
Remove the modem module:
1.Turn the computer upright with the front toward you.
2.Remove the two Phillips PM2.0×3.0 screws (1) that secure the modem module to the system board.
ENWW | Component replacement procedures 65 |