Power button board
Description | Spare part number |
|
|
Power button board (includes cable) | |
|
|
Before removing the power button board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 40), and then remove the following components:
●Optical drive (see Optical drive (select models only) on page 41)
●Keyboard (see Keyboard on page 49)
●Top cover (see Top cover on page 52)
Remove the power button board:
1.Turn the top cover upside down, with the top toward you.
2.Remove the two Phillips PM2.0×3.0 screws (1) that secure the power button board to the top cover.
3.Remove the power button board and cable (2).
Reverse this procedure to install the power button board and cable.
56 Chapter 4 Removal and replacement procedures