6.If it is necessary to replace the webcam/microphone module or microphone module:
a.Detach and release the module (1) as far as the module cable allows. (The module is attached to the display enclosure with
b.Disconnect the module cable (2) from the module.
c.Remove the webcam/microphone module (3) or microphone module. The webcam/ microphone module is available using spare part number
7.If it is necessary to replace the hinge covers:
a.Remove the two Phillips PM2.5×5.0 (1) screws that secure the hinge covers to the display enclosure.
66 Chapter 4 Removal and replacement procedures