Creating or “burning” a CD or DVD
If your computer includes a
Observe the following guidelines when burning a CD or DVD:
●Before burning a disc, save and close any open files and close all programs.
●A
NOTE: You cannot create an audio DVD with CyberLink Power2Go.
●Because some home and car stereos will not play
●A
●DVD players used in home systems usually do not support all DVD formats. Refer to the user guide that came with your DVD player for a list of supported formats.
●An MP3 file uses less space than other music file formats, and the process for creating an MP3 disc is the same as the process for creating a data file. MP3 files can be played only on MP3 players or on computers with MP3 software installed.
To burn a CD or DVD, follow these steps:
1.Download or copy the source files into a folder on your hard drive.
2.Insert a blank CD or DVD into the optical drive.
3.Select Start > All Programs, and then select the name of the software you want to use.
NOTE: Some programs may be located in subfolders.
4.Select the kind of CD or DVD you want to
5.
6.Open the folder, and then drag the files to the drive that contains the blank optical disc.
7.Initiate the burning process as directed by the program you have selected.
For specific instructions, refer to the software manufacturer's instructions, which may be provided with the software, on disc, or on the manufacturer's Web site.
CAUTION: Observe the copyright warning. It is a criminal offense, under applicable copyright laws, to make unauthorized copies of
10 Chapter 2 Using an optical drive