Administrator password
Your administrator password protects the configuration settings and system identification information in Setup Utility. After this password is set, you must enter it each time you access Setup Utility.
Your administrator password is not interchangeable with an administrator password set in Windows, nor is it displayed as it is set, entered, changed, or deleted. Be sure that you record your password and store it in a safe place.
Managing an administrator password
To set, change, or delete this password, follow these steps:
1.Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10 = BIOS Setup Options” message is displayed in the
2.Use the arrow keys to select Security > Set Administrator Password, and then press enter.
● To set an administrator password, type your password in the Enter New Password and Confirm New Password fields, and then press enter.
● To change an administrator password, type your current password in the Enter Current Password field, type a new password in the Enter New Password and Confirm New Password fields, and then press enter.
● To delete an administrator password, type your current password in the Enter Password field, and then press enter 4 times.
3.To save your changes and exit Setup Utility, use the arrow keys to select Exit > Exit Saving Changes.
Your changes go into effect when the computer restarts.
Entering an administrator password
At the Enter Password prompt, type your administrator password, and then press enter. After 3 unsuccessful attempts to enter the administrator password, you must restart the computer and try again.
Power-on password
Your
Using passwords 91