Troubleshooting
If the Notebook Stops Responding
■Press ctrl+alt+del and use Task Manager to end the application that is not responding.
■Press the power button for at least 4 seconds to turn off and reset the notebook. Unsaved data will be lost. Then press the power button again to turn the notebook back on.
■If nothing happens, insert the tip of a paper clip into the reset button on the bottom of the notebook. Then press the power button to turn the notebook back on.
■To avoid lockup problems, avoid turning the notebook off or putting it into Standby while
Power and Battery Pack Problems
If the Notebook Turns Off Immediately After It Turns On
Battery power is probably extremely low. Plug in the AC adapter or insert a charged battery pack.
If the Notebook Keeps Beeping
The notebook beeps repeatedly or displays a warning when battery power is low. Save your work, shut down Windows immediately, and insert a charged battery pack or plug in the AC adapter.
If the Battery Pack Does Not Charge
■Make sure the AC adapter is fully plugged into the power source and the notebook, and that the light on the adapter is on.
■If you are using a power strip, remove the AC adapter from the power strip and plug it directly into a wall outlet.
■Make sure the battery pack is fully installed and locked in place.
Reference Guide |