Thermo Products OL37-250, OT5-85, OH2-56, OH16-125, OL16-125, OT16-125 Rotation of Front Flue Elbow

Page 6

All installations and services must be performed by qualified service personnel.

The minimum clearances listed in the preceding table are for fire protection. Clearance for servicing the front of the furnace and the rear of the lowboy models should be at least 24 inches. A clearance of 24 inches is recommended for passage to all points on the furnace requiring service access.

The OH2-3-5-11-16 furnaces may be installed on combustible flooring. The OL2-5-11-16-20-33-37-39 and OC2-5 furnaces are to be installed on non-combustible flooring only. A non-combustible floor base is available for the counterflow models OC2-5, which then allows these models to be adapted for installation on combustible flooring (use non-combustible floor base Model No.125 for OC5, Model No 56 for OC2).

NOTE: The OH2 furnace is approved for closet installation. If the OH2 is installed in a closet, it requires two openings in the closet door for combustion air, each having a minimum area of 162 sq. inches. This free area for the OH2 intentionally exceeds the recommended minimum free area of 2 square inches per 1000 BTUH of input rate.

NOTE: When power venting a Thermo Pride oil fired furnace with a power venting system other than the system supplied by Thermo Pride, a fiber chamber and an isolated combustion air kit (PVB or Beckett boot) is to be used with the other manufacturers power venting system.

NOTE: On the front flue, lowboy, all highboy or counterflow models, it is possible to rotate the flue elbow (which is factory installed for vertical discharge) 90° counterclockwise from the vertical position to adapt to various venting systems. (See following page for details)

?CAUTION MUST BE TAKEN NOT TO EXCEED 90° ROTATION (OF THE FLUE ELBOW) COUNTERCLOCKWISE OR RIGHT FROM THE VERTICAL POSITION.

ROTATION OF FRONT FLUE ELBOW

When an installation requires that the flue exit out the left hand side casing on a front flue unit, remove screw securing the 90 deg. elbow and rotate it 90° counterclockwise. Then, by following dimensions in Table 1, locate the center point for the exit of the flue for the particular size furnace. Once the center has been located, use a scribe to mark the hole size, listed in the chart, which corresponds with the furnace being used. Cut hole out and extend flue through side casing.

A trim collar may be ordered from Thermo Products to hide the gap around the flue pipe. This trim collar, however, is not required for operation.

2

Image 6
Contents OIL Fired Furnace Safety Section ?WARNING and Cautions?CAUTION do not Attempt to Start the Burner When Page Section Table of Contents Beginning II. General Instructions Read Before Start of Installation Rotation of Front Flue Elbow Flue DIA Gasket Trim CollarUnit DIA. Hole Draft RegulatorsFilters Mounted External to the Furnace Air filter mounting location for the OC2-5 furnaceTypical filter rack and dimensions for the highboy furnaces Burner Installation FAN and Limit Position and LocationTWO Piece Mounting Plate Typical location of the overfire air tapExternal Wire Harness Locations for OL33 Horizontal Furnace PositionsBurner Specifications and Applications Thermo Pride Burner ApplicationsOIL Nozzle Capacity Chart Riello Burner Application Chart Heat Exchanger Cleaning InstructionsTypical Heat Exchanger Cleanout Cover Locations III. Users Information SectionInspection Areas Filter Cleaning and Location?CAUTION do not Attempt to Make Repairs Yourself Starting the BurnerLocation of the air filters on a typical counterflow furnace Customer APPENDIX-A Replacement Parts List Page Page Page Page Page Page Page Page Page APPENDIX-B Wiring Diagrams

OC5-85, OC2-56, OL11-105, OL2-56, OL20-151 specifications

Thermo Products offers a range of advanced temperature control solutions tailored for various industrial applications. Among the lineup are the OC2-56, OH16-125, OL37-250, OH11-105, and OL16-125 models, each designed with cutting-edge technologies and unique characteristics that cater to diverse user needs.

The OC2-56 is a compact and efficient temperature controller that excels in providing precise thermal management. It features advanced PID control algorithms, ensuring stable temperature regulation, while its robust build guarantees durability in tough environments. The intuitive user interface enables effortless temperature adjustments, making it suitable for both novice and experienced users.

The OH16-125 model is specifically engineered for applications requiring high-temperature processing. With a maximum operational temperature of 125°C, this unit includes an innovative heat exchanger that enhances thermal efficiency. Its easy-to-read digital display provides real-time temperature feedback, and its compact footprint allows for space-saving installations in demanding environments.

Designed for maximum versatility, the OL37-250 is perfect for large-scale operations. It supports multiple heating elements and comes equipped with a powerful heating mechanism, capable of reaching temperatures up to 250°C. The unit's intelligent monitoring system ensures optimal performance, while its user-friendly interface simplifies setup and operation.

The OH11-105 offers a unique combination of performance and energy efficiency. With a maximum temperature of 105°C, this model is ideal for medium-sized applications where reliable heat delivery is essential. Its state-of-the-art insulation technology helps reduce heat loss, making it an environmentally friendly option. Additionally, the OH11-105 features integrated safety mechanisms, protecting both the unit and the user.

Lastly, the OL16-125 is designed to support a wide range of industrial processes. With programmable settings and an easy-to-navigate control panel, this unit allows users to set specific temperature profiles for different applications. Its sturdy construction and high safety ratings make it an ideal choice for rigorous environments.

Overall, Thermo Products' OC2-56, OH16-125, OL37-250, OH11-105, and OL16-125 models showcase a commitment to quality, reliability, and innovation in thermal management technology. Each model is crafted to meet the highest standards and cater to the diverse needs of various industries, ensuring optimal performance in every application.