HP CQ10-688NR, CQ10-689NR, CQ10-610CA manual Diagnostics menu

Select	To do this
Processor C4 State	Enable/disable the processor C4 sleep state.
Boot Options	Set the following boot options:
	● f10 and f12 Delay (sec.)―Set the delay for the f10 and f12
	functions of Setup Utility in intervals of 5 seconds each (0, 5, 10,
	15, 20).
	● HP QuickWeb―Enable/disable the HP QuickWeb menu in Setup
	Utility.
	● Internal Network Adapter boot―Enable/disable boot from Internal
	Network Adapter.
	● Boot Device Priority―Set the boot device priority for:
	◦	Internal hard drive (select models only)
	◦	USB floppy
	◦	USB CD/DVD ROM drive
	◦	USB flash drive
	◦	USB Hard drive
	◦	USB Card reader
	◦	Network adapter
		NOTE: Only the devices attached to the system appear in
		the boot order menu.

Diagnostics menu

Select	To do this
Hard Disk Self Test (select models only)	Run a comprehensive self-test on the hard drive.
Memory Test	Run a diagnostic test on the system memory.

80 Chapter 5 Setup Utility