Chapter 1
Introduction
Using the IEEE 1394 Serial Bus in VXI Systems
Component
Overview
The HP E8491A PC Link to VXI Interconnect
The Adaptec®
The IEEE 1394 Serial Bus (FireWire) is a
Implementation of the IEEE 1394 serial bus as an I/O interface for HP VXI systems is provided through three components:
•HP E8491A PC Link to VXI Interconnect
•Adaptec®
•HP I_O Libraries
The HP E8491A is the VXI hardware that links the VXI mainframe backplane to the IEEE 1394 serial bus. The E8491A is a
The Adaptec®
The HP I_O Libraries The HP I_O Libraries provide the HP VISA and HP SICL drivers required to use the HP E8491A. Included with the libraries are the drivers for the
Adaptec®
Using this Manual This manual is organized to help you install, configure, and begin using the IEEE 1394 serial bus as quickly and efficiently as possible. The following information outlines the contents of the other chapters, and identifies the areas of programming a VXI system that are NOT covered in this manual.
Chapter 2: Interface
Installation and
Configuration
This chapter contains information on installing the HP E8491A hardware and its drivers (the HP I_O Libraries). Also included is information on installing VXI instruments, installing HP VXIplug&play drivers, and on verifying the system.
Chapter 1 | Introduction 11 |