Chapter 2
Interface Installation and Configuration
Using this Chapter
Step 1: Installing
the IEEE 1394
Host Adapter
Note
This chapter contains information necessary to install and configure the IEEE 1394 host adapter (if required) and the HP E8491A interconnect. The installation sequence and other topics covered in this chapter are as follows:
• Step 1: Installing the IEEE 1394 Host Adapter . . . . . . . . . . 13
• Step 2: Installing the HP E8491A Interconnect . . . . . . . . . . 18
• Step 3: Installing VXI Instruments . . . . . . . . . . . . . . . . . . . . 22
• Step 4: Installing the HP I_O Libraries. . . . . . . . . . . . . . . . . 26
• Step 5: Installing HP VXIplug&play Instrument Drivers. . . 30
• Step6: Verifying the Installation . . . . . . . . . . . . . . . . . . . . . . 31
• Running the Resource Manager . . . . . . . . . . . . . . . . . . . . . . 35
The IEEE 1394 adapter shipped as Option 001 to the HP E8491A is the
Adaptec®
If your personal computer (PC) currently has an Adaptec®
The layout of the Adaptec® host adapter is shown in Figure
Chapter 2 | Interface Installation and Configuration 13 |