N o t e s
N o t e
Installation
Install interface card.
Install interface card.
You can install the interface card without taking the system offline (that is, without switching the router off and taking all networks down)— refer to “Installing the Interface Card (System Online),” page 9. (Installing an interface card without taking the system offline is often called “hot swapping.”)
If you are installing the interface card in a slot that formerly was empty, or if you are installing the interface card in a slot that formerly held a different type of interface card (such as a WAN interface card), you must specify the new card in the configuration. (Refer to “Configure and boot the router” in chapter 1 of the HP Router 650 Installation Guide.)
Installing the Interface Card (System Offline)
If you will be installing the new interface card in a slot where another interface card is not currently installed, begin with step 2; otherwise, begin with step 1.
1.Disconnect all cables from the interface card you will be removing, and save them for reconnection when you later install that card again.
4