HP Fax 650 manual Opening Router Door

Page 5

Installation

Install interface card.

2.Open the front door of the router by pulling its lock—the round post at the upper right—to the right.

Figure 1. Opening Router Door

3.Switch the power supply off by pressing the bottom of its switch (marked with “ ❍ ”). If two power supplies are installed, switch both off.

4.Connect a grounding wrist strap (one is provided with the interface card) to your wrist and to the back of the router.

5

Image 5

Contents Installation Guide HP J2437A Product Numbers Ensure that you have the following items IntroductionInstalling the Interface Card System Offline Install interface cardOpening Router Door Unlocking Card Bezel Installing Interface Card Interface Card Label Location T e Unlocking Card Bezel Installing Interface Card Opening Router Door Interface Card Label Location U t i o n Connect network cablesCable-Management Bar and Tie-Wrap Arrange network cablesPrepare the router Troubleshooting Token Ring Port Definition Pin Definition of Token Ring ConnectorLoopback Connector Part number 5962-8322 E0894