Installation
Install interface card.
5.Press down slightly on the insides of both locks on the old card’s bezel (see figure 2), then swing them outward until the bezel disengages (see figure 3).
Figure 2. Unlocking Card Bezel
Figure 3. Disengaging Card Bezel
6.Grasping the left and right edges of the bezel, pull out until the tray is about half exposed.
7.Grasping the sides of the tray, remove the card from the router.
8.Holding the new interface card by the sides of its tray, slide the back of the tray about
6