The
Upgrading procedure
Be sure to follow the upgrade path and make sure that all previously installed IO Accelerator devices are updated with the appropriate
1.Prepare each existing IO Accelerator device for upgrade. a. Backup user data on each IO Accelerator device.
CAUTION: Upgrading IO Accelerator devices that were previously configured for VSL 1.x.x or 2.x.x to work with VSL 3.x.x requires a
Do not back up the data onto another IO Accelerator device on the same system. The backup must be to a local disk or to an externally attached volume.
b.Run the
fio-bugreport
c.Detach the ioDrive devices. For example:
For more information, see
2.Unload the current IO Accelerator driver. For example: $ modprobe
3.Uninstall the 2.x HP IO Accelerator VSL software.
a.Go to Start > Control Panel.
b.Click Administrative Tools.
c.Click Computer Management.
d.Click Device Manager in the console tree at the left.
e.Expand the IO Accelerator Devices item.
f.
g.Click Uninstall or Delete the driver software for this device (depending on your version of Windows®).
h.Restart the computer.
4.Install the new VSL.
a.Download the IO Accelerator installation program for Microsoft Windows from the HP website (http://www.hp.com/support) to your desktop or a convenient directory.
b.Run the IO Accelerator installation program. The installation program presents a custom setup
Mouse over a component in the tree view to see the description.
c.Click Next.