HP IO manual Fio-config options, Fioexternalpoweroverride

Option	Description
-e	Enumerates configuration parameter names and values.
-g <name>	Gets the configuration parameter.
-p <name>	Set and persist the configuration parameter.
-s <name>	Set the configuration parameter in memory only.
-V	Print verbose information.
-v	Print version information.

fio-config options

The following table describes the driver parameters you can set with the fio-configutility.

IMPORTANT: fio-configoptions must be entered in uppercase to function properly.

IMPORTANT: MSI (Message Signaled Interrupts) is enabled by default and it cannot be disabled using fio-config.

Option	Default	Description
	(min/max)
AUTO_ATTACH	1 (0,1)	Always attach the device on driver load (1).
IODRIVE_TINTR_HW_WAIT	0 (0, 255)	Interval (microseconds) to wait between hardware
		interrupts
FIO_EXTERNAL_POWER_OVERRIDE	No devices	Allows selected devices to draw full power from the
	selected	PCIe slot. Where the <value> for this parameter is a
		comma-separated list of adapter serial numbers.
FORCE_MINIMAL_MODE	0 (0,1)	Force minimal mode on the device (1), this
		parameter is set to false (0) by default.
PARALLEL_ATTACH	0 (0,1)	Enable parallel attach of multiple devices (1), this
		parameter is set to false (0) by default.
FIO_PREALLOCATE_MEMORY	0	For the selected device, preallocate all memory
		necessary to have the drive usable as swap space.
		For example:
		fio-config /dev/fct0 -p
		FIO_PREALLOCATE_MEMORY =
		"1234,54321"
		where "1234" and "54321" are serial numbers
		obtained from fio-status.
WIN_DISABLE_ALL_AFFINITY	0 (affinity is	When WIN_DISABLE_ALL_AFFINITY is set to 0,
	enabled)	the driver will enable interrupt and worker thread
		affinity in the driver. When
		WIN_DISABLE_ALL_AFFINITY is set to 1, the
		driver will disable all affinity settings. This is an
		override of any other affinity settings. The driver
		must be reloaded for this parameter to take effect.
WIN_DISABLE_DEFAULT_NUMA_AFFINIT	0 (default;	When WIN_DISABLE_DEFAULT_NUMA_AFFINITY
Y	NUMA	is set to 0, during initialization, the driver will query
	affinity is	the Windows® operating system for the affinity
	enabled)	settings assigned to the adapter by the OS. This
		setting is known as the "default NUMA affinity".
		Utilities 44