HP 3Com Etherlink III 3C590 manual

Page 32

13 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter

Connecting to a Novell NetWare 4.11 Server

9Accept the default network board settings and press “F10” to save it.

10Select option 6 “Highlight here and press <Enter> to install” and press “Enter” to begin installation.

11When the installation is finished, remove the 3COM 3C590 driver disk from the floppy drive and press <CTR><ALT><DEL> to restart the system.

12You may login to a server from the DOS prompt or load Windows for Workgroup v3.11 and use the “NetWare User Tools” from the NetWare Tools folder to login to a server. (If you do not have the required information, contact your network administrator).

Image 32
Contents 3COM Etherlink III 3C590 PCI 10BT Network Adapter Page General information to read before installing General information to read before installing Device Configuration Client for Microsoft Networks 3Com EtherLink Device Configuration Client for Microsoft Networks 3Com EtherLink Device Configuration Page Device Configuration Page Microsoft Windows NT 4.0 Workstation Page Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt Address 300 Page Connecting to a Novell NetWare 3.12 Server Page Page Connecting to a Novell NetWare 4.11 Server Page Page Requirements Page Microsoft Windows NT 3.51 Workstation Page Connecting to a Novell NetWare 4.11 Server Page Device Configuration Connecting to a Windows NT 4.0 Server Device Configuration Page