9 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Microsoft Windows NT3.51 Workstation
9Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Microsoft Windows NT3.51 Workstation
Connecting to a Windows NT 3.51 Server
Requirements
•HP Vectra with Windows NT 3.51 Workstation.
•3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2.
•Driver File: EL59X.SYS, version 1.22
•Microsoft Windows NT 3.51 Workstation media.
•Microsoft Windows NT 3.51 Service Pack 5 media.
•Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport and NWLink NetBIOS network protocols.
Device Configuration
Device Configuration | Vectra Vli8 | Vectra VEi7 | Vectra VEi8 |
|
|
|
|
Interrupt | 10 | 05 | 05 |
|
|
|
|
I/O Address | 300 | 300 | 300 |
|
|
|
|
Procedure
1With the HP Vectra turned off, install the 3COM 3C590 network adapter into a PCI slot.
2Connect network cable media to the 3COM 3C590 network adapter.
3Log into Windows NT with administrator privileges.
4Open the “Network” icon in the “Control Panel” program group.
5Click on “YES” in the “Network Settings” dialog box to install Windows NT Networking.
6Insert the Windows NT 3.51Workstation CD in the
7Set the path to “D:\I386” (D:\ represents the