HP 3Com Etherlink III 3C590 manual General information to read before installing

Page 4

General information to read before installing

2Press F2 to go to CMOS setup.

3Set PNP OS to NO and reserve IRQ 5.

4Save settings and boot to applicable OS.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 3COM Etherlink III 3C590 PCI 10BT Network Adapter Page General information to read before installing General information to read before installing Device Configuration Client for Microsoft Networks 3Com EtherLink Device Configuration Client for Microsoft Networks 3Com EtherLink Device Configuration Page Device Configuration Page Microsoft Windows NT 4.0 Workstation Page Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt Address 300 Page Connecting to a Novell NetWare 3.12 Server Page Page Connecting to a Novell NetWare 4.11 Server Page Page Requirements Page Microsoft Windows NT 3.51 Workstation Page Connecting to a Novell NetWare 4.11 Server Page Device Configuration Connecting to a Windows NT 4.0 Server Device Configuration Page
Top Page Image Contents