HP 3Com Etherlink III 3C590 manual

Page 2

Notice

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.

Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation.

MMXTM is a trademark of Intel Corporation.

Pentium® is a registered trademark of Intel Corporation.

Hewlett-Packard France

Commercial Desktop Computing Division

38053 Grenoble Cedex 9

France

©1999 Hewlett Packard Company

Image 2
Contents 3COM Etherlink III 3C590 PCI 10BT Network Adapter Page General information to read before installing General information to read before installing Device Configuration Client for Microsoft Networks 3Com EtherLink Device Configuration Client for Microsoft Networks 3Com EtherLink Device Configuration Page Device Configuration Page Microsoft Windows NT 4.0 Workstation Page Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt Address 300 Page Connecting to a Novell NetWare 3.12 Server Page Page Connecting to a Novell NetWare 4.11 Server Page Page Requirements Page Microsoft Windows NT 3.51 Workstation Page Connecting to a Novell NetWare 4.11 Server Page Device Configuration Connecting to a Windows NT 4.0 Server Device Configuration Page