HP vp6311, vp6320, vp6310b, vp6315 manual Turning the projector on and off

Page 26

Turning the projector on and off

Turning the projector on

1.Be sure the power cord is connected and the main disconnect switch is on.

2.Open the lens by sliding the lens cover 1 to the left.

3.Press the power button 2 on the projector or on the remote control.

The projector takes a minute or so to warm up. The power button blinks during warm-up.

TIP: If the picture does not appear on the screen, try the following:

•If you are using a computer, press the key combination that turns on its video output. For example, press FN+F4 or FN+F5 on some computers.

•On the projector, press the source button one or more times to select the correct input port.

26 Setting Up

Image 26

Contents HP vp6300 Series Digital Projector Page Contents Maintaining the Projector Installing PermanentlyFixing Problems Reference Page Setting Up Safety precautionsWhat’s in the box? Identifying major components Identifying common featuresProjector at a glance Foucus and zoom rings Projector buttons and lights Identifying the projector buttons and lightsBack panel Identifying back panel componentsVdc trigger output Remote control Accessories Setting up the projector Positioning the projectorPage Page Connecting power Connecting a computer Connecting a handheld organizer Connecting a video source Connecting a DVI sourceConnecting a component-video source Connecting an S-video source Connecting a composite-video source Turning the projector on and off Turning the projector onTurning the projector off Moving the projectorAiming the projector Making basic adjustmentsAdjusting the focus and zoom Using the remote control Setting Up Selecting a different source Showing PresentationsShowing a computer screen Hiding or showing the pictureShowing Presentations Choosing the best picture mode Adjusting the ProjectorAdjusting the picture and sound Adjusting the shape of the picture Adjusting a slanted picture Adjusting the picture for best color Adjusting other picture settingsAdjusting the projector setup Adjusting the volumeAdjusting other sound settings Preventing unauthorized useUsing the on-screen menu Changing settings using the on-screen menuInput menu For a visual aid, see Back panel on Input menuPicture menu Sound menu Setup menuSetup menu Sound menuHelp menu HelpMaintaining the Projector Performing routine maintenanceCleaning the projector lens Getting the projector statusReplacing the lamp module Performing routine maintenance Replacing the battery in the remote control USB method Upgrading the projectorUpdating the firmware Maintaining the Projector Installing on a table Installing PermanentlyInstalling the projector Installing on the ceilingInstalling for rear projection Locking the projectorControlling an external accessory Serial connections Connecting to a room controllerExamples of room controller commands Request *BRT=65CR Room controller commands RSRC=4CRLFVideo functions Value, +, -, ?Setup functions Audio functionsPower and status functions POSSimulated key presses StatFixing Problems Troubleshooting suggestionsStart-up problems Picture problemsTroubleshooting suggestions Fixing Problems Remote control problems Sound problemsInterruption problems Testing the projector Running the projector diagnosticsReference SpecificationsProjector Specifications Projector Specifications Video mode compatibility Mercury safety Safety informationLED safety Regulatory information CanadaJapan Korea International CRVSB-05CE Reference Index VGA Mercury Safety

Related manuals

Manual 2 pages 21.25 Kb