HP Essential Guide for VP6310 and VP6320 Projector Picture and Sound Settings

Picture menu (continued)

Color temperature	Shifts color toward red or blue.
Stretch	Selects how the picture fits on the screen:
	• Best fit automatically fits the picture without stretching it.
	• 1-to-1 shows each picture dot as one projected dot.
	• Reduced fits a standard-shape picture onto a widescreen projection
	screen.
Picture shift	Moves the picture within the projection area. This is useful if you are viewing
	a picture that is smaller than the full projection area, such as a widescreen
	movie.
Reset picture shift	Resets the picture shift to zero (centered).

Reset this picture mode Restores the current picture mode to its default settings.

Sound menu

Sound menu

Mute	Temporarily turns off the projector’s speakers.
Volume	Adjusts the loudness of the speakers.
Internal speakers	Sets whether the internal speakers are turned on.
Reset sound settings	Restores sound settings to their default settings.

Setup menu
	Setup menu
	Language	Selects the language used by the on-screen menu.
	Keystone	Corrects the slanted sides of the picture. This compensates for a projector
		that is too high or low relative to the screen.
	Reset keystone	Resets the keystone correction to zero (no correction).
	Lamp saver	Sets a lower power level for the lamp.
	Timeout for menu	Sets how many seconds the on-screen menu waits for input before it closes.

Using the on-screen menu 41