HP vp6320, vp6311, vp6310b, vp6315 manual Video functions, Value, +, -, ?

Video functions

Command	Parameters	Description
CSPC	0 to 2, ?	Sets or queries the active color space: 0=RGB, 1=YPbPr,
		2=YCbCr.
PMOD	0,1,5,?	Sets or queries the picture mode: 0=graphics, 1=video,
		5=custom.
VSHF	value, +, –, ?	Sets or queries the vertical shift of the projected image: usable
		range is determined by the active input source.
HSHF	value, +, –, ?	Sets or queries the horizontal shift of the projected image:
		usable range is determined by the active input source.
WHIT	0 to 10, +, –, ?	Sets or queries the white intensity.
BRT	0 to 100, +, –, ? Sets or queries the brightness.
CON	0 to 100, +, –-, ?	Sets or queries the contrast.
SAT	0 to 100, +, –, ?	Sets or queries the color saturation.
TNT	-45 to 45, +, –, ?	Sets or queries the tint.
CTMP	0 to 2, ?	Sets or queries the color temperature: 0=warm, 1=neutral,
		2=cool.
SHRP	0 to 12, +, –, ?	Sets or queries the sharpness.
PENH	0 to 6, +, –, ?	Sets or queries the picture enhancement setting.
KEYV	-50 to 50, +, –, ?	Sets or queries the vertical keystone: 0=no keystone adjustment,
		1 to 50=shrinks the top of the display, -1 to -50=shrinks the
		bottom of the display.
ASPT	0, 1, 4, ?	Sets or queries the aspect ratio: 0=1-to-1, 1=Best Fit,
		4=Reduced.
SYNC	None	Automatically resynchronizes the projector to the active
		computer input source.
FREQ	-50 to 50, +, –, ?	Sets or queries the projector’s timing relative to the active
		computer input source.

TRK value, +, –, ?

Sets or queries the synchronization of the projector to the active computer input source.

Connecting to a room controller 55