HP XB3000 manual Service Considerations, Plastic Parts

Page 44

Removal and Replacement Preliminaries

4.2 Service Considerations

The following sections include some of the considerations

that you should keep in mind during disassembly and assembly procedures.

✎As you remove each subassembly from the expansion base, place the subassembly (and all accompanying screws) away from the work area to prevent damage.

Plastic Parts

Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.

Cables and Connectors

ÄCAUTION: When servicing the expansion base, ensure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the expansion base.

Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or tearing cables. Ensure that cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.

4–2

Maintenance and Service Guide

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Maintenance and Service Guide Page Contents Removal and Replacement Preliminaries Product Description Product Description Features External Components Component FunctionFront Components Right-Side Components Left-Side Component ComponentFunctionRear Panel Components Rear Panel Components Wireless Accessories Select Models Only Keyboard ComponentsDesign Overview Using the Expansion Base Adjusting the Expansion BaseLowering the Expansion Base Connecting to AC Power Connecting the Expansion Base to AC Power Connecting the Computer Sliding the Computer into the Expansion Base Extracting the Expansion Cable Connecting the Expansion Cable Using the HP Expansion Accessory Adapter Connecting the HP Expansion Accessory Adapter Product Description Synchronizing Wireless Devices Select Models Only Synchronizing the Wireless Receiver and Wireless Mouse Troubleshooting Before Replacing PartsProblem Possible Cause Solution Problems and SolutionsDocking Problems and Solutions Undocking Problems and Solutions External Device Problems and Solutions Printers and FaxesProperties ProcessorNew device is not recognized as part of the system Optical Drive Problems and Solutions MultiBay II Problems and SolutionsGetting More Information Troubleshooting Illustrated Parts Catalog Serial Number LocationExpansion Base Major Components HP Expansion Accessory Adapter Hard drive power cordsSpare Parts Expansion Base Major Components HP xb3000 Notebook Expansion BaseWireless Components Spare Parts Wireless ComponentsWireless receiver 417335-001 Wireless keyboard Wireless mouseHard Drive Components Spare Parts Hard Drive ComponentsHard drive-300-GB,* Serial ATA Hard drive carrierSpare Part Number Description Sequential Part Number ListingSpare Parts Sequential Part Number Listing Removal and Replacement Preliminaries Tools RequiredService Considerations Plastic PartsPreventing Damage to Removable Drives Preventing Electrostatic Damage Packaging and Transporting Precautions Workstation Precautions Use the following grounding precautions at workstationsGrounding Equipment and Methods Typical Electrostatic Voltage Levels Static-Shielding MaterialsRelative Humidity Event 10% 40% 55% Material Use Voltage Protection LevelRemoval and Replacement Procedures Serial Number Disassembly Sequence Chart Preparing the Expansion Base for DisassemblyDisassembly Sequence Chart # of Screws RemovedInstalling an Optional Hard Drive Hard Drive ComponentsRemoving the Hard Drive Carrier Removing the Hard Drive Carrier Rear Panel Inserting the Hard Drive into the Hard Drive Carrier Connecting the Hard Drive Carrier Rear Panel Installing the Hard Drive Carrier Connecting the Hard Drive AC Adapter Specifications Expansion BaseHard Drive 300-GB Screw Listing Head Color Qty Length Thread Width Black Where usedTable A-1 Phillips PM2.5×7.0 Screw Color Qty Length Thread Width Silver Where used Table A-2 Phillips PM2.5×5.0 ScrewTable A-3 Phillips PM3.0×4.0 Screw Table B-1 Audio-In Microphone Jack Connector Pin AssignmentsPin Signal Table B-2 Audio-Out Headphone Jack Table B-3 External Monitor Port Table B-4 RJ-45 Network Jack Table B-5 Video-Out Jack Table B-6 Universal Serial Bus Power Cord Set Requirements Conductor Power Cord SetGeneral Requirements Country/Region Accredited Agency Applicable Note Number Conductor Power Cord Set RequirementsCountry-Specific Requirements Kema Index Index Index-3

XB3000 specifications

The HP XB3000 is a sophisticated docking station designed primarily for professionals looking to enhance their productivity and streamline their workspace. With a sleek and compact design, the XB3000 serves as the perfect companion for compatible HP laptops, providing a seamless connection to various peripherals while maintaining a clutter-free environment.

One of the main features of the HP XB3000 is its versatile connectivity options. The docking station is equipped with a variety of ports, including multiple USB 2.0 and 3.0 ports, a VGA connector, and HDMI output, allowing users to connect multiple devices simultaneously. This versatility ensures that peripherals such as printers, external hard drives, and monitors can be easily integrated into the workspace, enabling a more efficient workflow.

The XB3000 is specifically designed for portability. It’s lightweight and easy to set up, making it ideal for professionals who frequently move between offices or work remotely. The docking station features a simple plug-and-play setup, allowing users to connect their laptop with ease and start working immediately without the hassle of rearranging cables.

In terms of technology, the HP XB3000 boasts advanced power management capabilities. It not only provides power to the connected laptop, but also ensures that all connected devices receive adequate power without overwhelming the system. This feature is particularly beneficial for users who rely on power-hungry devices for their work, as it mitigates the need for multiple power adapters cluttering the workspace.

Another characteristic that stands out is the XB3000’s ergonomic design. The docking station maintains an elevated position for laptops, which can help improve posture and reduce strain during prolonged usage. The incorporation of cooling vents is an additional advantage, as it aids in effective heat dissipation, keeping the laptop cool during intense work sessions.

Lastly, the HP XB3000 is known for its robust build quality. Constructed with durable materials, this docking station is built to withstand the rigors of daily use while maintaining a sleek aesthetic that complements any professional environment. Overall, the HP XB3000 docking station is an essential tool for maximizing productivity and efficiency, making it an ideal choice for business professionals and tech-savvy users alike.
Top Page Image Contents