7.Lift the bezel (4) until it disengages completely.
8.If it is necessary to replace the webcam module, gently pull the webcam module away from the
(2). The webcam module and cable can be ordered by using spare part number
NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam module with the pins on the display enclosure and press onto the
9.If it is necessary to replace the display hinges, remove the six Torx M2.5×5.0 screws (1) that secure the hinges to the display housing.
100 Chapter 4 Removal and replacement procedures