7.Remove the optical drive bracket (2).
Reverse this procedure to reassemble and install an optical drive.
Power button board
Description | Spare part number |
|
|
Switch cover with power button board |
|
|
|
For use in computers with | |
|
|
For use in computers with | |
|
|
For use in computers with | |
|
|
Before removing the power button board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 55).
5.Remove the switch cover and keyboard (see Switch cover and keyboard on page 56).
Component replacement procedures 63