12.Remove the hard drive (see Hard drive on page 87).
13.Remove the top cover (see Top cover on page 103).
When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board:
●Memory module (see Memory module on page 60)
●WLAN module (see WLAN module on page 70)
●WWAN module (see WWAN module on page 76)
●Modem module (see Modem module on page 110)
●Processor (see Processor on page 83)
●Audio board (see Audio board on page 112) Remove the system board:
1.Position the computer
2.Remove the M2.0x3.0 screw on the left of the system board (1).
3.If this is a
NOTE: The
4.Lift the board at an angle (3) and remove the optical drive extender (4).
5.Slide the board partially out of the base pan (5).