Troubleshooting
Solving Problems
∙If the OmniBook is cold, allow it to warm up.
If the screen is difficult to read
∙Check whether the display resolution is set to its default setting, 1024 × 768 (XGA). Check this in Start, Settings, Control Panel, Display, Settings.
∙Check brightness (press Fn+F2 to increase brightness).
If an external monitor doesn’t work
∙Check the connections.
∙Press Fn+F5 in case the external monitor was disabled. (Do this three times to return to the state you started from.)
∙The external monitor may not be detected. In the BIOS Setup utility, try setting Video Display Device to Both in the Main menu. See “To run the BIOS Setup utility” on page 62.
∙If the monitor is connected to a video adapter in a docking system, in BIOS Setup make sure the Primary Video Adapter is set to Auto in the Main menu.
If the image on an external monitor or projector is unstable
∙Press Fn+F5 to turn off the
∙Change the display properties of the OmniBook display to match the resolution of the monitor or projector. In Control Panel, open Display, Settings and change the Desktop Area or Screen Area setting.
∙Use a monitor or projector that matches the resolution of the OmniBook display.
If multiple display support doesn’t work in Windows 98
In Windows 98, the computer supports multiple independent displays using the
∙Check the monitor connections.
∙If the monitor is connected to the OmniBook monitor port, you might have to reduce the resolution and number of colors for the
User’s Handbook | 71 |