Keyboard
NOTE: The keyboard spare part kit includes a keyboard cable.
For use in country or region: | Spare part number: | For use in country or region: | Spare part number: |
|
|
|
|
Keyboard in charcoal finish: |
|
|
|
|
|
|
|
For use in Brazil | For use in Latin America | ||
|
|
|
|
For use in Canada | For use in the United States | ||
|
|
|
|
Before removing the keyboard, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 32).
5.Remove the service cover (see WLAN module on page 37).
Remove the keyboard:
1.Remove the two rubber feet (1) that are attached to the rear corner covers. The rubber feet are attached to the rear corner covers by
2.Remove the two Phillips PM2.0×5.7 screws (2) that secure the rear corner covers to the computer.
3.Remove the rear corner covers (3). The rear corner covers are included in the Rubber Kit, spare part number
46 | Chapter 4 Removal and replacement procedures |