HP XZ930UT, VS832UT, 6000 manual 11Removing an Expansion Slot Cover Hardware Upgrades

Page 24

7.Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on the latch and rotating the latch to the open position.

Figure 2-10Opening the Expansion Slot Retainer

8.Before installing an expansion card, remove the expansion slot cover or the existing expansion card.

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card.

a.If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis.

Figure 2-11Removing an Expansion Slot Cover

18 Chapter 2 Hardware Upgrades

ENWW

Image 24

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Product Features Standard Configuration FeaturesFront Panel Components 1Front Panel ComponentsMedia Card Reader Components 2Media Card Reader ComponentsRear Panel Components 3Rear Panel ComponentsKeyboard 4Keyboard ComponentsUsing the Windows Logo Key 5Windows Logo Key FunctionsSerial Number Location 3Serial Number and Product ID LocationHardware Upgrades Serviceability FeaturesRemoving the Computer Access Panel 1Removing the Computer Access PanelReplacing the Computer Access Panel 3Tightening the Access Panel Thumbscrews Hardware UpgradesRemoving the Front Bezel Removing Bezel Blanks Replacing the Front BezelInstalling Additional Memory DIMMsDDR3-SDRAM DIMMs Populating Dimm Sockets 1DIMM Socket LocationsInstalling DIMMs Enww Removing or Installing an Expansion Card 2Expansion Slot Locations11Removing an Expansion Slot Cover Hardware Upgrades 13Removing a PCI Express x16 Expansion Card Enww Drive Positions 3Drive PositionsInstalling and Removing Drives 17Extra Guide Screw LocationsInstalling and Removing Drives System Board Drive Connections 4System Board Drive Connections19Disconnecting the Optical Drive Cables Removing an External 5.25-inch or 3.5-inch Drive20Disconnecting the Media Card Reader USB Cable Enww Installing an External 5.25-inch or 3.5-inch Drive 25Connecting the Optical Drive Cables 26Connecting the Media Card Reader USB Cable Enww Removing an Internal 3.5-inch Hard Drive Enww Installing an Internal 3.5-inch Hard Drive Enww Removing and Replacing a Removable 3.5-inch Sata Hard Drive Enww 37Replacing the Hard Drive Hardware Upgrades 39Replacing the Thermal Sensor Enww Specifications Table A-1SpecificationsAppendix a Specifications Battery Replacement Type Enww Installing a Security Lock External Security DevicesCable Lock Padlock HP Business PC Security LockEnww Front Bezel Security Figure C-6Engaging the LockEnww Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex VGAEnww

Related manuals

Manual 55 pages 39 Kb