HP 6000, XZ930UT, VS832UT manual 25Connecting the Optical Drive Cables

Page 35

8.Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place.

Figure 2-24Sliding the External Drives into the Drive Cage

9.Connect the power and data cables to the drive as indicated in the following illustrations.

a.If you are installing an optical drive, connect the power cable (1) and data cable (2) to the back of the drive.

Figure 2-25Connecting the Optical Drive Cables

CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires.

ENWW	Installing and Removing Drives 29

Image 35

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components Keyboard5Windows Logo Key Functions Using the Windows Logo Key3Serial Number and Product ID Location Serial Number LocationServiceability Features Hardware Upgrades1Removing the Computer Access Panel Removing the Computer Access Panel3Tightening the Access Panel Thumbscrews Hardware Upgrades Replacing the Computer Access PanelRemoving the Front Bezel Replacing the Front Bezel Removing Bezel BlanksDDR3-SDRAM DIMMs Installing Additional MemoryDIMMs 1DIMM Socket Locations Populating Dimm SocketsInstalling DIMMs Enww 2Expansion Slot Locations Removing or Installing an Expansion Card11Removing an Expansion Slot Cover Hardware Upgrades 13Removing a PCI Express x16 Expansion Card Enww 3Drive Positions Drive Positions17Extra Guide Screw Locations Installing and Removing DrivesInstalling and Removing Drives 4System Board Drive Connections System Board Drive ConnectionsRemoving an External 5.25-inch or 3.5-inch Drive 19Disconnecting the Optical Drive Cables20Disconnecting the Media Card Reader USB Cable Enww Installing an External 5.25-inch or 3.5-inch Drive 25Connecting the Optical Drive Cables 26Connecting the Media Card Reader USB Cable Enww Removing an Internal 3.5-inch Hard Drive Enww Installing an Internal 3.5-inch Hard Drive Enww Removing and Replacing a Removable 3.5-inch Sata Hard Drive Enww 37Replacing the Hard Drive Hardware Upgrades 39Replacing the Thermal Sensor Enww Table A-1Specifications SpecificationsAppendix a Specifications Battery Replacement Type Enww Cable Lock Installing a Security LockExternal Security Devices HP Business PC Security Lock PadlockEnww Figure C-6Engaging the Lock Front Bezel SecurityEnww Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyVGA IndexEnww

Related manuals

Manual 55 pages 39 Kb