Menu Guide
Channel Search
6. 22KHz | : Depending on the user’s antenna switch box or LNB. |
| You can supply either 22KHz by setting “ON” or not |
| by setting ”OFF”. |
| When selecting the |
| the 22KHz will be dimmed. |
7. 0V/12V | : Depending on the user’s antenna switch box. |
| You can choose either 0V/12V. |
8.Tone Burst : Depending on the user’s antenna switch box.
(“off”, “SAT A” or “SAT B”)
9.Press the BLUE button to set Drive(Fine Drive or Normal Drive) to run the motor.
-Fine Drive/Normal Drive : To move the motor, press LEFT/RIGHT(
/ 
) button.
-Go to zero : To move the zero position, press OK( OK ) button.
-Store to location : To store the current position, press OK( OK ) button.
-East Limit : To set the east limit by current position, press OK( OK ) button.
-West Limit : To set the west limit by current position, press OK( OK ) button.
-Clear Limit : To clear the stored limit value, press OK( OK ) button.
●After selecting all that is necessary, press RED button to scan the satellite list. Pop up widow will be displayed.
●Select ON or OFF according to your Network.
●Select All or FTA Search Type.
●Press OK( OK ) button and searching will start.
DIGITAL SATELLITE RECEIVER 24