HP KSC-570 manual Change PIN Code, Parental Lock

Menu Guide

System Setting

11. Change PIN Code

From here you can change the PIN code from the standard 0000. DO NOT FORGET IT! Without it, you are not able to access to any of the functions where the code is required.

You can change password for Parental Lock and Receiver Lock simultaneously.

1.Input the current PIN code using numeric button on the remote control.

2.In the highlighted new PIN code, input a new PIN code.

3.To verify the new PIN code, re-enter a new PIN code in the highlighted confirm PIN code.

If the PIN code is correct, the message “Success” will be displayed on the display window.

Note: If you forget the PIN code, press the RGYB(Color) button in sequence. (i.e. Red -> Green -> Yellow -> Blue button)

The PIN code will be changed to ‘0000’

12. Parental Lock

When you change “Parental Lock” to “On” or “Off”, service channel can get or not from that set values. If you select “On”, you may need PIN code every time you select the lock channel program as you set in the channel control.

If you select “Off”, you can see all channels without PIN code.

37DIGITAL SATELLITE RECEIVER