Menu Guide
Channel Search
7. 0V/12V | : Depending on the user’s antenna switch box. |
| You can choose either 0V/12V. |
8.Tone Burst : Depending on the user’s antenna switch box.
(“off”, “SAT A” or “SAT B”)
9.Longitude : Press the NUMERIC buttons and enter the Longitude. When the OK( OK ) button is pressed. It can be toggled East/West.
10.Latitude : Press the NUMERIC button and enter the Latitude. When the OK( OK ) button is pressed, it can be toggled North/South.
11.Press the BLUE button to set Drive(Fine Drive or Normal Drive) to
run the motor.
-Fine Drive/Normal Drive : To move the motor, press LEFT/RIGHT(/ ) button.
-Go to zero : To move the zero position, press OK( OK ) button.
-East Limit : To set the east limit by current position, press OK( OK ) button.
-West Limit : To set the west limit by current position, press OK( OK ) button.
-Clear Limit : To clear the stored limit value, press OK( OK ) button.
Note: After the Degree, Longitude and Latitude is enterted accurately. the DiSEqC Motor will automatically move to the satellite’s position.
●After selecting all that is necessary, press RED button to scan the satellite list. Pop up widow will be displayed.
●Select ON or OFF according to your Network.
●Select All or FTA Search Type.
●Press OK( OK ) button and searching will start.
27DIGITAL SATELLITE RECEIVER