HP KSC-570 manual KU Switch, LNB Freq, LNB Power, 22KHz, 0V/12V, Tone Burst, DiSEqC

Menu Guide

Channel Search

3.	C/KU Switch	: You can select C/KU band by selection of switch type.
4.	LNB Freq.	: Select the proper LNB frequency referring to your LNB
		using OK( OK ) and UP/DOWN(	) buttons.

5.C-LNB Freq. : When selecting the C/KU Switch is selected as “None”, the C-LNB Freq will be dimmed automatically.

Press OK( OK ) button, and then the C-LNB Freq. list will be displayed. You can also input the freq. you want. After inputting freq. using numeric buttons, press OK( OK ) button.

6.	LNB Power	: Select the LNB Power On or OFF.
7.	22KHz	: Depending on the user’s antenna switch box or LNB.
		You can supply either 22KHz by setting “ON” or not by
		setting ”OFF”.
8.	0V/12V	: Depending on the user’s antenna switch box.
		You can choose either 0V/12V.
9.	Tone Burst	: Depending on the user’s antenna switch box.
		(“off”, “SAT A” or “SAT B”)
10. DiSEqC		: You can select and use appropriate port for your
		DiSEqC switch box.
		Press OK( OK ) button to select DiSEqC List.
		(None, DiSEqC A, DiSEqC B, DiSEqC C, DiSEqC D)

●After selecting all that is necessary, press RED button to scan the satellite list. Pop up widow will be displayed.

●Select ON or OFF according to your Network.

●Select All or FTA Search Type.

●Press OK( OK ) button and searching will start.

21DIGITAL SATELLITE RECEIVER