Using the STK594 Top Module
2-2 FPSLIC STK594 User Guide
2819A–FPSLI–07/02
Figure2-1.
Connecting the STK594 to the STK500 Board
Note:
Connecting the STK594 with the wrong orientation may damage the boards.
Note:
Do not mount the STK594 at the same time an AVR is mounted on the STK500
board.
2.2 PORT
Connectors
Since the AT94K devices have additional ports not available on the STK500, these ports
are locatedon the STK594 board. The STK594 portshave the same pinout andfunc-
tionality as the ports on the STK500 board .S ince Port A to Port D are already present
on the STK500 board, they are not duplicated on the STK594.
2.2.1 PORT E Figure 2-2 shows the pinout for the I/O port headers Port E.
Figure2-2.
General I/O Ports
Note:
Port E is also present on the STK500, but only PE0 to PE2 (3 least significant
bits) are accessible. To access all Port E bits the connector on the STK594
must be used.
PE1
PE3
PE5
PE7
VTG
PE0
PE2
PE4
PE6
GND
1 2
PORT E