1 Introduction
●What you need for installation
●For more information
Thank you for purchasing the HP Jetdirect 2700w USB Solution Print Server.
NOTE: The HP Jetdirect 2700w Print Server complies with IEEE 802.11 wireless standards.
What you need for installation
You need the following:
●The HP Jetdirect 2700w USB Solution Print Server.
●A supported Microsoft Windows, Apple Macintosh, or Linux/Unix computer. An 802.11b, g, or n wireless LAN (WLAN) interface card must be installed. The following operating systems are supported:
◦Microsoft Windows Server 2003, Windows Server 2008, Windows 7, Windows Vista, Windows XP
◦Mac OS X 10.4 and later
◦UNIX/Linux:
For a complete list of supported operating systems, see Embedded services on page 17.
●A supported HP printer or multifunction peripheral (MFP). Go to http://www.hp.com/go/jetdirect to see a current list of supported printers and MFPs.
Your printer/MFP must be operating properly. Use the documentation supplied with your printer/ MFP to assemble and test the device.
●For wireless infrastructure mode only: An access point, wireless router, or Apple AirPort base station. The HP Jetdirect 2700w USB Solution Print Server allows your printer to be accessible on a WLAN through a specific access point.
In station (infrastructure) mode, an access point allows wireless devices to connect to your LAN (wired or wireless). For more information, see Infrastructure mode on page 14.
ENWW | What you need for installation | 1 |