HP M517, M417 manual Off and then on again

Problem	Possible Cause	Solution
The camera	The camera is	Turn on the camera, or turn it
does not	turned off or has	off and then on again.
respond when	shut down.
I press a
button.	The camera is	Most of the camera buttons do
	connected to a	not respond when the camera
	computer.	is connected to a computer. If
		they respond, it is only to turn
		on the Image Display if it is off,
		or, in some cases, turn off the
		Image Display if it is on.
	The camera is	Wait until the Memory light
	processing an	turns off, indicating the camera
	image.	has completed processing the
		previously-taken image.
	The batteries	Replace or recharge the
	are drained.	batteries.
	The optional	Ensure that the memory card is
	memory card is	the proper type for your
	not a supported	camera (see page 166). If the
	card or is	card is the proper type, turn off
	corrupted.	the camera, remove the
		memory card, turn on the
		camera, and see if the camera
		responds when you press a
		button. If so, then the card is
		probably corrupted. Replace
		the memory card.
	The camera has	Reset the camera (see
	stopped	page 96).
	operating.

Troubleshooting and Support 109