HP M517, M417 manual Install the Batteries

2. Install the Batteries

1.Open the Battery/Memory card door on the side of the camera by sliding the door toward the bottom of the camera.

2.Insert the batteries as indicated inside the door.

3.Close the Battery/Memory card door by pushing the door down and sliding the door toward the top of the camera until the door latches.

For the performance of Alkaline, Lithium, and NiMH batteries when used

with this camera, see Performance per Battery Type on page 148. For hints on optimizing battery performance, see Appendix A, Managing Batteries, starting on page145.

TIP: You can also use an optional HP AC power adapter to power the camera. If you use rechargeable NiMH batteries, you can recharge the batteries in the camera using the optional HP AC power adapter or the optional HP Photosmart M-series dock, or recharge the batteries separately in the optional HP Photosmart Quick Recharger. For more information, see Appendix B, Purchasing Camera Accessories, starting on page155.

Getting Started 11