HP E327 manual Corrupted Camera, remove Memory card, and turn on

Problem	Possible Cause	Solution
The camera	The camera is	Most of the camera buttons do
does not	connected to a	not respond when the camera
respond when	computer.	is connected to a computer. If
I press a		they respond, it is only to turn
button		the Image Display on if it is off,
(continued).		or, in some cases, turn the
		Image Display off if it is on.
	The camera is	Wait until the Power/Memory
	processing an	light turns solid green,
	image.	indicating the camera has
		completed processing the
		previously taken image.
	The optional	Ensure that the memory card is
	memory card is	the proper type for your
	not a supported	camera (see page 121). If the
	card or is	card is the proper type, turn off
	corrupted.	the camera, remove the
		memory card, and turn on the
		camera. If the camera responds
		when you press a button, then
		the card is probably corrupted.
		Replace the memory card.
	The camera has	Reset the camera (see
	stopped	page 68).
	operating.
A long delay	The scene is	• Use the flash.
occurs	dark and the	• If using flash is not possible,
between	camera is
		then use a tripod to keep
pressing the	taking a long
		the camera steady during
Shutter button	exposure.
		the long exposure time.
and the
camera taking
a picture.

Troubleshooting and support 79