Setup
To locate a part on your camera (such as a button or a light) while following the instructions in this section, see Camera parts on page 14.
1. Install the batteries
1.Open the Battery/Memory card door on the side of the camera by sliding the door toward the front of the camera.
2.Insert the batteries as indicated inside the door.
3.Close the Battery/Memory card door by pushing the door down and sliding the door toward the back of the camera until the door latches.
For the performance of NiMH, Lithium, and Alkaline batteries when used with this camera, see Performance per battery type on page 106. For the number of shots you can expect to get for each battery type based on usage, see Number of shots per battery type on
page 107. For hints on optimizing battery performance, see Appendix A, Managing batteries, starting on page 103.
TIP: If you use rechargeable NiMH batteries, you can recharge the batteries in the optional HP Photosmart quick recharger. For more information, see Appendix B, Purchasing camera accessories, starting on page 113.