HP 850 manual Installing the memory card, Turning on power, Close the memory card door

Installing the memory card

1With the camera turned off and the back of the camera facing you, open the memory card door by sliding the door to the right.

2Insert the memory card, making sure that it snaps into place.

3Close the memory card door.

To remove the memory card, first make sure the camera is turned off. Open the memory card door, then push the memory card in and it will spring from the camera.

Turning on power

Turn the camera on by rotating the OFF/Mode selector to the mode you want to use:

z—Still mode

z—Self-Timer mode

z—Video mode

The lens extends, the Image Display turns on briefly, and the Power/Memory light turns on solid green.

NOTE If the Power/Memory light is blinking red, the batteries are very low, and the camera will shut down soon. Replace or recharge the batteries, or use an optional HP AC adapter to power the camera. For more information about the HP AC adapter, see Purchasing camera accessories on page 93.

16 hp photosmart 850 user’s manual