6If you are using a:
•Windows computer, you will be asked to sign in to HP’s Passport program. HP Passport allows you to use HP’s free e-mail service and other services that may be available in the future. The first time you see this screen, you will need to register as a new user. Follow the instructions on the screen to register.
•Macintosh computer, add the e-mail addresses you want. Then skip to step 8.
7Once you have successfully registered, sign in to the HP Passport program, and then the Photo E-mail Setup screen will appear. Here, you can enter an e-mail address and specify how you want it to appear in the camera’s Share menu. You can also enter a subject and message to go with all e-mails that will be sent to that address. After completing the form, click Next. In the confirmation screen that appears, click Finish.
8Your newly added e-mail destination should now appear in the Modify Share Menu screen (in the Current Share Menu section). To add additional e-mail addresses to the camera Share menu, repeat steps 5-7 on Windows, or steps 5-6 on Macintosh. If you are using a Windows computer, you will not need to sign in to the HP Passport program again.
9When you have finished adding e-mail addresses, click on Save to Camera on a Windows computer or click on Next on a Macintosh computer to add the new addresses to the camera Share menu. When the computer confirms that the addresses were saved to your camera, disconnect the camera from the computer, and press the Share 
button to view the new e-mail destinations in the Share menu.
10You are now ready to select images on the camera to be e-mailed. See the next section for how to do this.
Chapter 4: Using hp instant share | 55 |