HP 215 manual Subject in the center of the frame, Out too dark

Problem	Possible Cause	Solution
	Your subject was not in	The camera focuses on the object in the center of the
	the center of the frame.	frame. For best results, compose your photo with your
		subject in the center of the frame.
		Point the camera at a subject in the center of the photo
		and press the shutter button half way down until the
		green light appears. Re-aim your camera at your
		intended subject and press the shutter button all the
		way down.
My photo turned	There was not enough	Wait for natural lighting conditions to improve or use
out too dark.	light.	the flash to illuminate your subject.
	The flash was on, but	The flash can only illuminate objects that are within 2–
	the subject was too far	8ft. (.6–2.5 m) of the camera. Make sure your subject is
	away.	within range of the flash when you take the photo.

www.hp.com/photosmart 55