IN3118HD User’s Manual
LED Error Messages
ERROR CODE MESSAGES | POWER LED | LAMP / READY LED | TEMP LED |
|
|
|
|
Powered on | Solid Green | Solid Red | OFF |
|
|
|
|
Powering up | Solid Green | Flashing Red | OFF |
|
|
|
|
Cooling down | Solid Green | Flashing Red | OFF |
|
|
|
|
Over Temperature | OFF | OFF | Solid Red |
|
|
|
|
Thermal Break Sensor error | Flashes Green 4x | Flashes Green 4x | OFF |
|
|
|
|
Lamp error/Color wheel control error | Flashes Green 5x | OFF | OFF |
|
|
|
|
Lamp End of lamp life detected | Flashes Green 5x | Flashes Green 3x | OFF |
|
|
|
|
Burner Fan error | Flashes Green 6x | Flashes Green 1x | OFF |
|
|
|
|
Lamp Fan error | Flashes Green 6x | Flashes Green 2x | OFF |
|
|
|
|
Power Fan error | Flashes Green 6x | Flashes Green 3x | OFF |
|
|
|
|
DMD Fan error | Flashes Green 6x | Flashes Green 4x | OFF |
|
|
|
|
Case Open | Flashes Green 7x | OFF | OFF |
|
|
|
|
DMD error/Ignition failed | Flashes Green 8x | OFF | OFF |
|
|
|
|
Color wheel error | Flashes Green 9x | OFF | OFF |
|
|
|
|
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re- starting the projector. If the POWER or LAMP LEDs are still blinking or the TEMP LED is lit, contact InFocus Technical Support at www.infocus.com/support.
Image Problems
Problem: No image appears on the screen
1.Verify the settings on your notebook or desktop PC.
2.Turn off all equipment and power up again in the correct order.
3.Many laptops do not automatically turn on their external video port when a projector is connected. Usually a key combination like FN + F8 or CRT/LCD key turns the external display on and off. Locate a function key labeled CRT/LCD or function key with a monitor symbol. Press FN and the labeled function key simultaneously.
Problem: The image is blurred
1.Adjust the Focus on the projector.
2.Press the Auto Image button on the remote control or the
3.Ensure the
4.Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1.Position the projector so it is as perpendicular to the screen as possible.
2.Use the Keystone button on the remote control or projector to correct the problem.
Problem: The image is reversed
Check the Projection setting on the Setup >> Basic menu of the OSD.
– 38 –
